How To Fill A Nail Hole In Drywall

Have some holes in your walls from hanging pictures or other things on the wall? Today I'k going to walk you through how to patch nail, screw, and anchor holes in your drywall (and other wall types!).

Ane of the little, annoying things most getting ready to motility is all of the tiny tasks that y'all ignore on a day-to-day basis that yous really need to have care of for the new owners. Things like scrubbing the baseboards (who has time for that anyways?), cleaning the oven (and then much work!), or patching all of the tiny holes in your walls.

Maybe you're non moving – maybe you just want to modify upwardly the art on your walls and when you have downward your quondam gallery wall you're left with a wall that looks more than similar it'southward been used every bit a bulletin lath.

Patching boom holes tin be one of those projects that people put off for forever and ever because they're intimidated or it but seems like also much work – well, I'm here today to bear witness you that information technology'due south not likewise much work and information technology's not that difficult. It's affordable, easy, and volition be so worth the effort – promise!

This mail contains affiliate links. Click hither to read my full disclosure policy.

How to patch blast holes in drywall

While it might feel intimidating at commencement, patching blast holes in drywall is actually ane of the simplest projects around.

My number 1 recommendation is to start by grabbing this 3M iv-in-1 Patch Plus Primer. It will brand everything and then incredibly easy and you'll exist left wondering why in the world you didn't practise this sooner.

Patching small Drywall holes:

Start past removing the nail or screw from the wall (and be sure to remove the ballast also if there is ane).
Use the cap of the 4-in-1 Patch Plus Primer to (very) lightly sand downward the wall to remove any paint or drywall flakes.
Squeeze a bit of the Patch Plus Primer into the hole – you lot want it to completely fill the hole and overflow simply a picayune.
Utilise the dorsum cease of the Patch Plus Primer tube to press the spackle into the hole and scrape off all of the excess. You'll desire to utilise a little bit of pressure here to make sure you aren't left with a ton of extra spackle.
Let it to dry for about 30 minutes.
Come up back with the hat of the spackle tube and lightly sand and so that the patch is polish with the residuum of the wall.
Paint over the patch with the wall color!

That'southward it!

There are a few ofttimes asked questions about this, though, and so allow's address those.

Is it difficult to make sure the pigment matches?

It kind of depends on several factors. If the paint has been there more a year or so and the sunlight hits it often, it may be slightly faded and not match exactly. You lot can play around with the tinting of the pigment if yous need to!

Y'all'll also desire to make certain that you fully stir your paint and if you have to buy more than paint to purchase the same sheen.

If you don't have actress paint lying effectually, my recommendation is to head back to the shop and just grab a sample size of your wall color (they'll practise any sheen you need, fifty-fifty in the sample sizes). Then, yous can keep it on manus for any futurity painting touch-ups too!

How does this work on texture walls? Is it visible?

If you have textured walls (like nosotros do) it's always harder to patch holes and brand them invisible. I observe that equally long as yous get the pigment matching correct, the nail holes generally disappear for the about function, even with texture on the walls. However, some walls are more heavily textured and information technology'south near impossible to hibernate it.

If you lot demand to repair the texture after applying the patch, you can just grab 1 of these cans of spray texture and (lightly!) apply it to friction match the existing texture. It tin can be tricky to get it correct, just remember information technology'south an art, not a science.

Tin can't I just apply toothpaste to patch the walls?

Nooooo! This is a suggestion yous'll see often as a elementary "life hack" but this is not a expert long-term solution. Toothpaste isn't meant for this kind of awarding (plain), and then fifty-fifty in one case information technology dries, it can shrink and crack, leaving you with an cruddy wall.

I promise, the four-in-i Patch is merely as piece of cake to use as toothpaste would be. But say no to the toothpaste patch.

Patching Nail holes in plaster walls (& Other types!)

What if yous don't accept drywall? When I shared that I was doing this over on my Instagram stories, the questions came pouring in about other types of walls. Hither's a quick rundown of a few of the more than common wall types I got questions about.

plaster walls

Plaster walls should exist no different than drywall when patching small nail holes. Simply lightly sand the area to remove any loose $.25, then fill up with the spackle just as you would with drywall!

Brick walls

When patching holes in brick walls, the best method is to mix up some mortar and patch the hole with that. If you desire to be sure that the spot blends in well, you tin can become an extra brick that matches the color of your existing brick, and then crush it up and alloy with the mortar to dye information technology to match. Just use a putty knife to spread the mortar into the hole and permit it to dry.

For a simpler method, silicone caulk should also piece of work well to patch nail and screw holes in brick walls, though it might not blend as well if your walls are unpainted.

Paneled Walls

If you've got paneling on your walls (shiplap, bead board paneling, or anything else forth those lines), patching smash and spiral holes is still actually elementary.

Grab a woods filler that fits the cease on your wall. Something basic like this should work if you plan on painting it, but if the wall is stained you'll demand a wood filler that can handle stain.

Lightly sand the area, so use a putty knife to spread the wood filler into the hole (the best method is to swipe it in one direction over the hole to apply it, then swipe in the opposite direction to remove the backlog). Allow information technology to dry, lightly sand, and utilise a second glaze before finishing.

Patching nail holes is one of those projects that you might put off for a long fourth dimension, but I promise that one time y'all get effectually to doing information technology, you'll be shocked at how quick and easy information technology is to make the walls feel like new!

For more detailed behind-the-scenes on how to do simple projects like this, be sure you lot're post-obit me on Instagram stories so you don't miss a affair!